Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoCenter CLIP function (caller id) BC6000/Btalk1100

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #49679
    ekw
    BRONZE Member

    Dear All!

    My question is about the beocom 6000 mk1 in combination with beotalk 1100; they are serving now for a long time without big issues just since a few weeks the caller id (CLIP) is not shown any more; the phone company says “everything working”

    on some calls the function works most of the time not;

    the complete setup it made of Beocom 6000 mk1, BeoTalk 1100, 2 beocom 2500 and one phone on top (Porsche Design) which is not able to show CLIP

    does anyone has an idea?

    best regards

    Elmar

    #49680
    Guy
    Moderator

    I assume that your phones are connected via a modem/router – have you tried restarting it and/or checking that the firmware is up to date?

    The you could try disconnecting all the phones and BeoTalk, and then trying them one-by-one to see if CLIP works individually.  Perhaps one of them is supressing the CLIP signal.

    You could also try a reset of the BC6000 handset and/or its base:  (make sure that you have backed up phone contacts if they are stored on the base):

    – Reset base: Press (dot) 7 000 8

    – Reset handset: Press (dot) 7 000 9

    You could also try replacing the batteries in the BC2500s.

    Location: Warwickshire, UK
    My B&O Icons: No description available No description available No description availableNo description availableNo description availableNo description available No description available No description availableNo description availableNo description availableNo description availableNo description availableNo description availableNo description available
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.