CDX low and weak output

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #11904
    PeterL
    BRONZE Member
    • Topics Started 1
    • Total Posts 2

    Hi all. I am new to this forum and I am currently working with a CDX for a friend.

    The cd could not be read by the player but by following advice from this forum I re-soldered the vias and now it reads ok. However, the output is very low and the sound is a bit weak and bright. I did not replaced any capacitors but before doing that I just thought I place a question here to see if there is anybody with this experience and what you did to fix this problem.

    Thank! great forum by the way.

    Peter Lindström
    Sweden

    #12124
    Shelbysfoster
    BRONZE Member
    • Topics Started 0
    • Total Posts 1

    Hello,

    Since you didn’t post any basic cd player troubleshooting information,
    there is little anyone can do to help other than suggest you do
    standard cd player troubleshooting. Mynordstrom

    #12132
    Dillen
    Moderator
    • Topics Started 2
    • Total Posts 192

    Replace capacitors on the decoder/audio PCB.

    Martin

    #12688
    PeterL
    BRONZE Member
    • Topics Started 1
    • Total Posts 2

    Hi.

    Thanks for the input. I changed all capacitors and now it is working just fine.

    Peter

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.