BV 9 and projector

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 11, 2023 at 4:23 pm #17327
    Ipe
    GOLD Member
      • Finland
      • Topics Started 5
      • Total Posts 12

      Hi!

      I have a problem with loudspeakers connected to BV 9.

      If use with projector only loudspeakers on tv and subwoofer work.

      Immediately when format in beo4 is pushed twice and picture shifts to projector

      front speakers (beolab 8000) will cut off.

      Any suggestions?

      March 12, 2023 at 11:05 am #17363
      beoandy
      GOLD Member
        • Topics Started 0
        • Total Posts 7

        hi! you must also configure the speakers in cinema mode. (roll, distance, volume, etc.) so switch to cinema mode (format 0) and go to the bv9 (bs3) menu on the cinema screen.

        beoandy

        March 12, 2023 at 3:09 pm #17376
        Ipe
        GOLD Member
          • Finland
          • Topics Started 5
          • Total Posts 12

          Thanks, of course 🙂

          Works fine now.

          Ipe

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.