Breaking Beomaster 8000 for Parts

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #8385
    alf
    BRONZE Member

      hi All,

      breaking a Beomaster 8000 for parts.

      if you need something send me a PM.

      ALF

      #8386
      chartz
      BRONZE Member
        • Burgundy

        Hi Alf. ☺️

        PM sent.

        • This reply was modified 1 year, 6 months ago by chartz.
        #8554
        square4
        BRONZE Member
          • Fredensborg Denmark

          Hi Alf.

          I would like to buy this steel clips.

          DSC_0001_4DSC_0002_2

          Henrik.

          #8587
          quattttro
          BRONZE Member

            y’know the springs you get in picture frames to push the backing against the glass? Those work well as an alternative.

            #8588
            Glitch
            BRONZE Member

              A replacement spring could also be made from spring steel sheet stock. It is a simple shape that could be cut out with a Dremel or nibbler tool. The stock springs are 0.5mm thick.

              Glitch

              #8634
              alf
              BRONZE Member

                The following parts are gone:

                uP board, display board, big alu cover – anything else is available 😁

                ALF

                #9545
                alvar
                BRONZE Member

                  Hello!

                  The aluminium upper board hinge is available?

                  I mean the long black plastic piece that attaches the alu cover to the chassis.

                  Regards

                  #9548
                  alf
                  BRONZE Member

                    Hi,

                    i am not quite sure what exactly you mean – please go to the service manual, check the explosion drawing and tell me the part number.

                    ALF

                    #10829
                    didier
                    BRONZE Member

                      Hi Alf,

                      I’m looking for the wood veneer in rosewood,

                      The left spring (under the release rail),

                      and the lid damper mechanism,

                      I sent you a pm 🙂

                      #11233
                      tamtapir
                      BRONZE Member
                        • Sweden

                        I would love to get the glass section from your 8000.

                        Do you still have it?

                        /Di ck

                         

                        #11267
                        alf
                        BRONZE Member

                          Is your glass cover broken or just scratched ?

                          i still have the glass cover  – it is good but not mint.

                          please send a PM so I can mail a photo and you decide them.

                          ALF

                          #12316
                          tamtapir
                          BRONZE Member
                            • Sweden

                            Thank you for the glass panel.

                            It arrived safely today!

                            Best Regards,

                            Di ck

                            Attachments:
                            You must be logged in to view attached files.
                            #12349
                            alf
                            BRONZE Member

                              Thank you so much for letting me know – that is good news 🙏🏼👍

                              enjoy – regards, ALF

                              #12369
                              chartz
                              BRONZE Member
                                • Burgundy

                                Oh, MY glass panel?

                                What happened? 🧐

                              Viewing 14 posts - 1 through 14 (of 14 total)
                              • You must be logged in to reply to this topic.