Home › Forums › Product Discussion & Questions › BeoTime › Beotime disassembly
- This topic has 6 replies, 4 voices, and was last updated 9 months, 1 week ago by silou.
-
AuthorPosts
-
17 March 2024 at 08:14 #53604
Hello
No more sound on my Bedtime. I saw the service manual, but if you have some tips or advice to do it properly…
Thanks
17 March 2024 at 08:51 #53605Have a look here: https://archivedforum2.beoworld.org/forums/p/189/270504.aspx#270504
18 March 2024 at 21:33 #53606Thanks, Guy. I wasn’t aware there was a service manual; I’ve now downloaded it.
On mine, I put fresh batteries, these last 48-72 hrs, and poof, the thing is dead again. I thought I might open it up and see if a cleaning might help… but removing the 3 LCDs and the joystick look challenging already.
I think I’ll keep it as a useless ornament, a memento of what it once was!
18 March 2024 at 21:41 #53607There were originally (yesterday!) some photos in the link to lausvi’s post but they seen to have disappeared. Hopefully they will re-appear as I recall they were quite useful.
18 March 2024 at 22:01 #53608Thanks, Guy. I’ve reported to Administrator that the pics are missing, here:
18 March 2024 at 22:38 #53609Hopefully they will re-appear as I recall they were quite useful.
I have at least some of the pics still, I can dig them up tomorrow if the archived thread doesn’t return.
I did get sound back for a while with a new speaker wire, but it didn’t last long (mechanical stress due to the movement with the alarm button) and I haven’t bothered to re-do the whole thing again.
19 March 2024 at 21:15 #53610I have at least some of the pics still, I can dig them up tomorrow if the archived thread doesn’t return. I did get sound back for a while with a new speaker wire, but it didn’t last long (mechanical stress due to the movement with the alarm button) and I haven’t bothered to re-do the whole thing again.
I probably have the same problem; no more sound.
Seems really not easy to open it…
And need to find an improvement for this cable stress…
-
AuthorPosts
- You must be logged in to reply to this topic.