Beosystem 3500

Tagged: BEOCORD 3500, Beogram CD3500, Beosystem 3500

This topic has 3 replies, 2 voices, and was last updated 6 months, 3 weeks ago by Dillen.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
9 October 2023 at 20:24 #2632
kronzilla
BRONZE Member
- Topics Started 34
- Total Posts 90
HeHello, I have just serviced a Beosystem 3500 and lubricated the gears of the cover of the Beocord and BeoGram CD with special lubricant. but its motor still makes a screeching noise. any idea what lubricant I can use for the motor bearings? (so that no plastic parts fail or become brittle. thank you in advance
10 October 2023 at 16:40 #21640
Dillen
Moderator
- Topics Started 4
- Total Posts 393
What “special lubricant” did you use?

Martin
11 October 2023 at 07:48 #21631
Dillen
Moderator
- Topics Started 4
- Total Posts 393
The belt will not be the problem then.
I suggest you add a small drop of oil to the motor bearing. Usually, the outer (visible) bearing will dry out before the inner, and it’s also the outer bearing that takes most
of the sideways load, so I would start there.
A little sinter/spindle oil would be the choice.

Martin
11 October 2023 at 13:27 #21627
kronzilla
BRONZE Member
- Topics Started 34
- Total Posts 90
Seems that it’s not the motors but the gearboxrs. Somebody has an exploded vieuw of them? I dont want to take them apart before i know how to re-assemble them
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.