Beomaster 7000 Not Responding to Remote

[Dan Joseph]

Hi Everyone,

I recently acquired a Beomaster 7000, a Beogram 7000 turntable, and two Beomaster 1000 remotes. The system has not been used for a number of years because none of the original remotes were working any longer, and that includes a Beolink 7000 remote which I don’t have. The units do power on, and I can hear radio static when speakers are connected (it appears to be stuck on the radio setting)

My questions are: 1) Can the Beomaster 1000 remotes be programmed to control the 7000 equipment on their own, assuming they still work or can be repaired; and b) can a replacement remote that is guaranteed to be working be programmed to control the hardware?

Any feedback is much appreciated.

Best regards, Dan

[Guy]

Hi Dan and welcome to Beoworld!

The BL1000 remote should be fine to operate the basic functions of the BM7000.  (Non B&O replacements are unlikely to work because B&O use a different IR frequency to most).

You can check if a remote is working by viewing the transmitting end with an iPhone selfie camera – you should be able to see the IR emitters glowing when a function is pressed.

If/when the remote is working, there is still a chance that the Beomaster is set to A.OPT 0, where it will not respond to IR commands.  To resolve this, with the Beomaster at stand-by, press SOUND then 1 then STORE on the BL1000 remote.  The Beomaster should then receive and respond to IR commands.

So in summary, fix or replace a BL1000 remote and then take it from there …

The system you have is well worth fixing, so come back and ask if you have further questions 😀

 

Location: Warwickshire, UK

My B&O Icons:

[Dan Joseph]

Guy, thank you for responding – I was able to clean the corroded battery contacts on my BL1000 and now it works! Thanks for the advice….In a related question, do you know how to switch between AM and FM radio using the remote?  Best regards, Dan

 

[Guy]

Try SHIFT then SOUND

Location: Warwickshire, UK

My B&O Icons:

[Dan Joseph]

Thank you again, that works!

[Guy]

No problem. Glad to hear that you are up and running! 😀

Location: Warwickshire, UK

My B&O Icons:

[Author]

Posts