beomaster 3500 4500 display issue

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoMaster beomaster 3500 4500 display issue

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #50273
    Dillen
    Moderator
      • Topics Started 3
      • Total Posts 593

      Bad solder joints?

      Martin

      #50274
      Jerryege
      BRONZE Member
        • Topics Started 7
        • Total Posts 23

        been through it and re-flowed a few including all of the display and a few from 6IC3 but no change.

        I have managed to ascertain exactly which segments are not working. all working apart from the second array. working lines only, shown below.

         

        #50272
        Jerryege
        BRONZE Member
          • Topics Started 7
          • Total Posts 23

          Hello all, got an odd one and hoping the community could help me out.

          I have a Beomaster 3500 BM3500 with an issue on the 4×7 red display. part number in the manual is 8300244. the first digit doesn’t not display at all and the second digit, only the top half displays. I can see it changes with volume or station, but display isn’t complete.

          Any thoughts on what this could be?

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.

        Home Forums Product Discussion & Questions BeoMaster beomaster 3500 4500 display issue

        • You must be logged in to create new topics.