beolab 6000 repair with end of 3500

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoLab beolab 6000 repair with end of 3500

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #42762
    filipbrugge
    BRONZE Member
      • Topics Started 1
      • Total Posts 3

      hello, my beolab 6000 has a scratch.

      As I have beolab 3500 just lying here, can I swap one of the ends of the 3500 and use as a top of the 6000 ?

      #42763
      matador
      Moderator
        • Paris France
        • Topics Started 48
        • Total Posts 736

        My god, “a beolab 3500 just lying here…”, criminal.    😀

        Service manual show different part number but the look like very close with the same groove and have the same way of mounting, two prongs and a screw in the middle.
        If you have booth at hand, I would take measurements and try my luck.

        Capture d’écran 2023-01-13 à 14.15.55Capture d’écran 2023-01-13 à 14.15.47

        #42764
        KolfMAKER
        BRONZE Member
          • The Netherlands
          • Topics Started 28
          • Total Posts 228

          Hi Filipbrugge,

          Do you have a deep scratch?

          I have experimented with a chrome type of repair marker. It worked quite well to cover the deep scratch damages.

          #42765
          filipbrugge
          BRONZE Member
            • Topics Started 1
            • Total Posts 3

            thank you for the reply, the 6000 has a little dent on the side – I will try to swap them and keep both working 😉

          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.