- This topic has 7 replies, 2 voices, and was last updated 1 month ago by
-
I’ve had this Beolab 3500 Mk1 for a while now and I have stored the sound settings (default volume, bass, treble, loudness) in the past, but now I want to change it (the default volume, specifically), and can’t figure it out! I think I was using a Beolink 1000 when I originally did it, and now I have a Beo4 Mk4 and a Beo5, and I cannot figure it out with either of these. My Beolab 3500 is in Opt.4.
I know the command I need is S.Store, but I cannot seem to add that command to either remote.
Beo4 Mk4:
The lexicon says that S.Store should be available to add as a list item, but only if A.Setup has been added. So, I added A.Setup, but still could not find S.Store to add. Even though I have added A.Setup, it does not appear if I press the List button to cycle through the extra buttons, but if I go back into List settings, I can see it is there.
Beo5 Software 1.45b:
The Beo5 manual says that Sound Store should be available as a button, but I cannot find it in the config tool, so I can’t add it. I have only found Store, so I added it, but that didn’t work (I didn’t really expect it to – Store is intended for TV settings). There is also no A.Opt available to add in the Beo5 config tool.
I was able to create a submenu and add Bass, Treble and Loudness, and when I click those ‘Bass’, ‘Treble’ or ‘Loudness’ do appear in the BL3500’s display, but then I can’t adjust them. I tried the volume wheel, the central arrow buttons and the outer ring buttons, but none of them result in any actual adjustment.
I know there’s be a solution, but I’m buggered if I can find it. Any help would be much appreciated.
Beo4 Mk4: The lexicon says that S.Store should be available to add as a list item, but only if A.Setup has been added. So, I added A.Setup, but still could not find S.Store to add. Even though I have added A.Setup, it does not appear if I press the List button to cycle through the extra buttons, but if I go back into List settings, I can see it is there.
Use LIST to go to A.SETUP. Then press OK. Then use LIST to cycle through BASS, TREBLE, LOUDNSS, and then …….. S.STORE 😀
Location: Warwickshire, UKMy B&O Icons:
If I go back into List settings I can see that A.Setup is there (available for me to move or remove), so I know I added it successfully, but I cannot seem to get it to appear in the extra buttons when I click List.
This may be because the Beo4 is set to control a Video source (eg, with TV showing in display).
Have you tried pressing RADIO (or any other audio source) and then cycling through LIST?
Location: Warwickshire, UKMy B&O Icons:
Still can’t figure out how to do the same with my Beo5, but at least it’s sorted, thanks.
There’s a table in the Beo5 handbook that says ‘S.STORE’ on the Beo4 is equivalent to ‘Sound Store’ (text in full) on the Beo5 – does that help? I assume that like the Beo4 it will only appear when you are controlling an audio product. Can’t think of anything else but hopefully someone else knows!!
Location: Warwickshire, UKMy B&O Icons:
Yes I read that in the Beo5 handbook too, but still, neither S.STORE or SOUND STORE appear as a button you can add in the config tool. There is just a STORE button available to add, but that has no effect.
Seems odd that it would be missing in the Beo5 config tool – there must be a way to add it, surely.
- You must be logged in to reply to this topic.