Home Forums General Discussion & Questions Beolab 18 + beoconnect with WISA

  • This topic has 2 replies, 2 voices, and was last updated 1 week ago by 20cen.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #60505
    20cen
    BRONZE Member

      Hi all,

       

      is there a a way to make one of this 2 setup:

      – connect 2 beolab 18 with a beoconnect with WISA

      – or connect 1 beolab 18 with a beoconnect with powerlink, and the second beolab 18 with WISA connected to the first beolab 18

       

      thanks for your help

      #60523
      DT79
      BRONZE Member
        Unfortunately not. The Beoconnect Core doesn’t have Wisa built in. You could connect the Beoconnect Core to a Transmitter 1 and then connect the BL18s via Wisa, however the downside of that approach is that you lose the ability to optimise the output of the Beoconnect Core to the BL18s.
        You can connect one BL18 to the Beoconnect core via Powerlink, but then you need to connect the first BL18 to the second via Powerlink as well.

        Hi all, is there a a way to make one of this 2 setup: – connect 2 beolab 18 with a beoconnect with WISA – or connect 1 beolab 18 with a beoconnect with powerlink, and the second beolab 18 with WISA connected to the first beolab 18 thanks for your help

        #60557
        20cen
        BRONZE Member

          Ok thanks for your answer 🙂

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.