beolab 1700 Voltage and current adjustments - BeoWorld Forum

This topic has 2 replies, 2 voices, and was last updated 2 years ago by TW180800.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
9 March 2023 at 03:27 #44386

TW180800
BRONZE Member

Hello – i have a circuit diagram. But cannot locate the procedures to check/adjust power supply voltage (32v) and also the driver current (not even sure what it should be!). I’ve been looking for a service manual and can only locate circuit diagrams.. Any advice or pointers to a service manual or just the procedures would be very much appreciated. Many Thanks Tony

17 March 2023 at 20:53 #44387

Ninni
BRONZE Member

Maybe the service manual for the Beomaster 901 can be used? Aren’t the amplifier sections identical? I’m currently working on a BM 901, by the way.

17 March 2023 at 22:22 #44388

TW180800
BRONZE Member

Thank you will check that suggestion out.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.