BeoLab 11 issue

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoLab BeoLab 11 issue

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #50084
    LukeS
    BRONZE Member
      • Topics Started 4
      • Total Posts 28

      I’m sure you’ve already considered this, but are you using the correct powerlink cable version? This will definitely cause a hum if you use the incorrect version

      #50083
      jonniebravo1963
      SILVER Member
        • Topics Started 3
        • Total Posts 7

        Hi all,

        Would appreciate any thoughts.

        Lab 11 had a low humming sound, no real sound other than that and green light stable. Stripped down and appeared to be coming from pcb 35 ICE amp. Swapped this for a new one and all working for 3 hours then same thing has occurred. Hoping this hasn’t damaged new module but struggling to think why this would happen.

         

        Cheers

        Jonnie

        #50085
        jonniebravo1963
        SILVER Member
          • Topics Started 3
          • Total Posts 7

          Yes Luke MK3 and been using it for 10 years or so..

           

          #50086
          Beojuhl
          BRONZE Member
            • Topics Started 0
            • Total Posts 2

            Try another cable first

            #50087
            jonniebravo1963
            SILVER Member
              • Topics Started 3
              • Total Posts 7

              1st thing I did, brand new cable and same problem

               

            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.