Hi All,
working on my Beogram 8002 which decided to die over night ?!
no Standby LED, nothing….
After a complete recap the unit partially worked again:
when Play is activated the carriage moved to the 33 to 45 switching point and stopped.
STOP wasn’t working but only the manual ‘in function’ (<<) was working.
checked the motor control circuit (1TR3 and 1TR4) – acc to the service manual
1TR4 = PU51 transistor ! What I found was a dead MPSW 51 transistor instead ?
I ordered a Pu51 but was wondering if there are equivalent types I could use ?
advice would be greatly appreciated.
ALF