Home › Forums › Product Discussion & Questions › BeoGram › Beogram 5500 turn table
- This topic has 1 reply, 2 voices, and was last updated 2 years, 3 months ago by Mark-sf.
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
20 June 2022 at 05:04 #35611
Platter is not level. I believe one of the transportation screws is stripped. How should I proceed?
20 June 2022 at 20:14 #35612The transport screws are not used to adjust the leveling and do not come out so they are not likely stripped. The screws to level are under the platter. Take a look at the service manual at https://beomanuals.com/manuals/Beogram/Beogram%205500/Beogram_5500-Service_Manual-version2.pdf for instructions.
-
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.