Home › Forums › Product Discussion & Questions › BeoGram › Beogram 5500 DIN connector
- This topic has 3 replies, 3 voices, and was last updated 2 years, 1 month ago by Ismo.
Viewing 4 posts - 1 through 4 (of 4 total)
-
AuthorPosts
-
4 November 2022 at 09:43 #40509
Hi,
Can anyone tell why there is 2 different din connectors for Beogram 5500 ? 5pin connector and 7pin connector. Below is the 7pin connector that has 2 bottom (thicker) pins as extra.
Regards,
Ismo
4 November 2022 at 23:15 #40510The extra pins in the 7-pin one carry the Datalink signal to Beomaster receivers for remote control. The pins can be unscrewed to use with a DIN-RCA adaptor.
5 November 2022 at 11:44 #40511But if you do remove the two extra pins keep them somewhere safe so that future users of the Beogram can use datalink again! ?
5 November 2022 at 16:54 #40512Thanks for fast answers.
Ismo
-
AuthorPosts
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.