Home › Forums › Product Discussion & Questions › BeoGram › Beogram 1203 motor bearings removal
- This topic has 3 replies, 2 voices, and was last updated 1 year, 4 months ago by
alf.
-
AuthorPosts
-
9 April 2023 at 10:29 #45636
Hi All,
Can someone guide me through the process of removing (replacing) the top motor bearing of my BG1203 that sits under the stepped pulley ?
no trouble with the bottom bearing but the top one puzzles me ?
thank you so much ?
ALF
9 April 2023 at 13:02 #45637I guess it would have been tricky to explain……the good news is: i worked it out myself.
isn’t that nice ?! ???
ALF
9 April 2023 at 14:25 #45638Hi Alf
Maybe you let all others know how you managed the deal with the stepped pulley.
regards
Christian
10 April 2023 at 02:14 #45639Hi Christian,
refer to the service manual page 5-7 explosion drawing:
remove motor from the turntable by unscrewing from its 3 anker points and disconnect.
take off idler wheel (one thing less to worry about)
take off the cover – item 184
separate stator from the motor – item 177
remove motor bracket, held in position by 3 rods and secured by one nut – item 164
that frees up the rotor and its bottom bearing – item 178
remove and replace bearing with its oil-soaked felt ring after cleaning.
hope that gave some idea how to remove the bottom bearing
ALF
-
AuthorPosts
- You must be logged in to reply to this topic.