Home Forums BeoWorld around the world! Nordic beocenter 9300

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #43850
    beobov
    BRONZE Member

      Hello out there. My old Beocenter 9300 has no signal in HT-1 but full signal in HT-2 and earphone! Does anyone have an idea about the problem?

      Thanks in advance from beobøv.

       

      #43851
      Guy
      Moderator
        • Warwickshire, UK

        Hi and welcome to Beoworld!

        Either you have left a (quarter inch to 3.5mm) headphone adaptor in the headphone socket, or the mute relay is faulty (it only affects Speaker 1 socket).  Both are common occurrences and you can find more about the latter by searching for Mute Relay in the old forum.

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.