Home Forums Product Discussion & Questions BeoCenter beocenter 7700 cassette runs at half speed

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #39583
    beostuff
    BRONZE Member

      Hi. I have a beocenter 7700 that I’d changed all the cassette belts on – then let it sit for 9 months. Now the tape player plays at half speed.  I’ve also noticed that the motor is always running – even if the radio is playing. Also (sorry there’s a few) the belt on the smaller wheel underneath the tape deck seems to be rubbing on the large aluminium wheel. That doesn’t seem right. Any ideas?

      Thanks

      #39584
      Dillen
      Moderator

        Check the DC voltage to the motor with a scope. Look for correct voltage and amount of ripple.

        Martin

        #39585
        beostuff
        BRONZE Member

          Thanks will check it out. I have a feeling it’s something mechanical – as the position of the wheel with the smaller belt doesn’t seem right. I’ll check both. Appreciate it

           

          #39586
          beostuff
          BRONZE Member

            it seems to be that the pads that hold each spindle (that fit into the casette) aren’t being released so are providing pressure hence the slow speed. Trying to track down what releases those pads – any idea if both spindles get released upon play?

            Thank

            #39587
            Dillen
            Moderator

              Did you lubricate using something that evaporates or dries?

              Martin

            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.