Beo Sound I type 2585 aux - BeoWorld Forum

Beo Sound I type 2585 aux

This topic has 4 replies, 3 voices, and was last updated 2 years, 2 months ago by warrima.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
9 May 2022 at 11:40 #34712
warrima
BRONZE Member
- Topics Started 1
- Total Posts 3
I have Beo Sound I type 2585 and the CD player is beyond repair. I have been using an external player plugged into the aux port. However now the CD buttons no longer function to access aux input.

What can i do to continue using this system. i enjoy the sound and would prefer to repair or find a way to keep using the unit. B&O service say it cant be repaired.

Is there any hardware hacks to access the aux input. or any recommendations.
9 May 2022 at 12:13 #34713
KolfMAKER
BRONZE Member
- The Netherlands
- Topics Started 28
- Total Posts 228
Dear Warrima,

What brand and type of CD player did you connect to the BeoSound?
9 May 2022 at 21:58 #34714
Millemissen
BRONZE Member
- Flensborg————Danmark
- Topics Started 24
- Total Posts 1,084
If you have a Beo4 remote, you can open the A.Aux port with the A.Tape/A.Mem button.

MM
10 May 2022 at 04:50 #34715
warrima
BRONZE Member
- Topics Started 1
- Total Posts 3
KolfMAKER wrote:

Dear Warrima, What brand and type of CD player did you connect to the BeoSound? A Denon DCD F100
10 May 2022 at 04:52 #34716
warrima
BRONZE Member
- Topics Started 1
- Total Posts 3
Millemissen wrote:

If you have a Beo4 remote, you can open the A.Aux port with the A.Tape/A.Mem button. MM

Thanks. I have a remote somewhere – i never used it. I dont recall seeing a Tape button however i may be mistaken.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.