Home Forums Product Discussion & Questions BeoPlay Beosound 5 settings Reply To: Beosound 5 settings

#34585
NQVHNWI
FOUNDER Member

    Hi,

    Im a bit rusty on BS5 settings with ML TVs. Hopefully this will give you pointers to self-diagnose.

    1. BeoSound 5 / Beomaster 5

      Connection Audio

      BeoSound 5 can be placed in a setup, where either BS9000, BC2, BC2AO,

      BS3200 or BS4 is used as audiomaster and BeoSound 5 is used

      for N.MUSIC and N.RADIO.

       

      Audiomaster YES/NO on BeoSound 5 must be set to NO in this setup.

      This will disable OPTIONS setting for the BeoSound 5.

      The OPTION setting, referred to in this conclusion refers to

      the Audiomaster.

       

      Selecting option on the audio master

      Option:  AUTO configurating (option 0)

      ********************* AUDIO/VIDEO/LINK SYSTEM SETUP *******************

      Connection

      Connect the Master Link socket of the audiomaster to the MASTER LINK

      socket of the TV-set using a BeoLink cable.

      ********************* REMOTE CONTROL FOR MAIN ROOM ********************

      The recommended remote control is Beo4

      The following remote controls may also be used:

      Beo5

      Setup for Beo4 remote control:

      Beo4’s “LIST” must contain the following items in order to be able

      to operate the Main Room products.

    2. You will not see the BS5 on the TV. However, you will get Beomaster5 contents on N.Music or N.Radio
    3. Connect Beolabs to the TV PL outputs and not the BS5