Home Forums Product Discussion & Questions BeoMaster Beomaster 6000 Type 2702 service manual Reply To: Beomaster 6000 Type 2702 service manual

#34016
Vinlyfrontier57
BRONZE Member

    Thanks for your post, Craig (#4161).

    I checked the 20V and 21V rails that are generated on PCB2.  They measured 10V and 11.5V respectively, so there is a problem here too.

    Can you by any chance remember which components had failed on your unit?  Was it the regulator transistor (2TR8) on the cct diagram?

    Thanks,

    Phil (Vinylfrontier57)