Beovision stand for 10-40 / 10-46

[BeoStoked]

hello all,

I’m hoping there might be someone out there with a stand for my beovision 10-40.

I believe that the stand is type 4666 and is suitable for both the 10-40 and 10-46 televisions.

its a long shot but if there are any out there in need of a new home please get in touch. I am based in the U.K.

Thanks in advance!

[Ravsted]

Just an alternative option.

If you are a ‘handyman’ … it should be possible to convert a BV7-32 stand for the BV10-40.

Where I live there are many BV7 stands available and you get them more or less for free (<40£)

You can buy a DIN<>8 PIN micro-fit molex cable or solder one and make a plywood adapter plate yourself.

 

• This reply was modified 6 hours, 10 minutes ago by Ravsted. Reason: mini > micro

[Tignum]

Hi, +1 with Ravsted: check this thread too: https://archivedforum2.beoworld.org/forums/t/36445.aspx,

I have a 7-32 stand spare (the 4091 floorstand), but it is in the Netherlands…

I own both stands actually and was curious for the heights.

My BV7-32 stand measures about 87cm (top of the footplate to top of the interface).

My BV10-40 stand measures about 62cm there, with an 8cm gap between footplate and TV.

So using this stand for a 10-40 would actually result in (87-62)+8=33 cm gap! Too much and ugly. Maybe the lower 4092 fits? Or shorten the pole handyman style?

Regards, Johan

Location: Netherlands

My B&O Icons:

[Tignum]

Maybe the lower 4092 fits?

That will be tight (112-80)!

Shortening a 4091 sounds safer :-).

Regards, Johan

Location: Netherlands

My B&O Icons:

[Author]

Posts