Home Forums Product Discussion & Questions BeoMaster Beomaster 900 k problem with stereo light

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #50065
    zukzuzlowiec
    BRONZE Member

      Hellomy name is Wojtek and this is my first time on this forum and I have a problem.

      I bought couple weeks ago beomaster 900k.Works good but I have a problem with stereo mode

      When I turn on cassette mode or gramophone stereo light turn on, but when I turn beomaster on radio mode fm stereo light won’t turn on.

      Does anybody had this same problem?.

       

      #50066
      Dillen
      GOLD Member

        The stereo decoder module was an optional extra in Beomaster 900K.
        Not all Beomasters had them installed.
        If no stereo decoder module has been installed, FM reception will be mono only, and the stereo indicator won’t light up.

        Martin

        #50067
        zukzuzlowiec
        BRONZE Member

          Would you show me photo with stereo decoder to check this thing on my beomaster.

          Maybe I don’t have this item on radio but why stereo light flashing when I turn on cassette mode? is it normal.

          #50068
          Dillen
          GOLD Member

            The decoder is the module to the right of the amplifier module in this photo.
            It has no visible leads out side this.

            BM900 with decoder

            When Tape or Phono is selected as source, the stereo light should be lit.
            If it flashes, it could be because of a bad switch contact or the lamp is not securely fixed in
            its socket. Or the lamp itself is on its way out.

            Martin
            (Photo from http://www.vintage-radio.net)

          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.