Home › Forums › For Sale & Wanted › Wanted › Beocenter 9300 CD spindle bush
- This topic has 6 replies, 5 voices, and was last updated 2 years, 3 months ago by adyan.
-
AuthorPosts
-
29 June 2022 at 07:49 #35817
The plastic bush that the CD clips onto has split. I was wondering if there is a work around other than the superglue which is holding it barely together right now. It looked to me as though it would be an ideal 3D printing project… if only I had a 3D printer and knew how to use it!
This is my first post on the forum, so please forgive me if this is in the wrong place or has already been answered. (I did search the archives).
Thanks
29 June 2022 at 07:57 #35818Do a search on the previous forum. The 3D mesh is available for download in some topic about 3D printing. Get it and have it printed with a local 3D printing service.
29 June 2022 at 09:58 #35819Quiet right, there were discussions about that spindle, someone had a .stl file but sadly did not share for other users, maybe I’ve not found the right thread but if there is a file downloadable or PM please let us know.
Thanks
Christian
29 June 2022 at 10:41 #35820I really thought it was an .stl file somewhere but I can’t find it either.
If somebody can post a rough sketch with measurement and pictures, I should be able to shape it.
5 July 2022 at 20:09 #35821I´ve got an .stl File for free, please PM me
Works as Neil has already tested.
Kind regards
Christian
31 July 2022 at 21:41 #35822Or try to use 2-component epoxy glue. Cyanoacrylate superglue is not durable
1 August 2022 at 12:55 #35823I got the .stl file from spassmaker (Christian). Can confirm it works. Even for my BC 9000.
-
AuthorPosts
- You must be logged in to reply to this topic.