Sign in   |  Join   |  Help

Search

  • Re: Beolab 4000 or Beolab 6000?

    I have both. 6000 mounted against the walls, the 4000 in wall cabinets. The 4000's produce more and tight base, but the music IMHO sounds much better on 6000's. I would say the 4000's are punchy and a bit bright, the 6000 much better balanced - frankly for certain types classical pieces they rival my 8000's. I ended pairing my 8000's with a good Velodyne sub and they sound great. My 6000's are next to a room (large opening between rooms) with 12-2's and a BL11 - if I turn
    Posted to General Discussion & Questions (Forum) by Simbohm on Sun, Nov 30 2014
  • Re: New House

    Installers used a lot of Tyco stuff for interconnects from Cat7 etc... For hdmi - I opted to use distribution amps vs a matrix (still up in the air if I should have gone Matrix) - all Atlona since they have a relationship with B&O - and its one throat to choke :) I deviated a couple of times from Cat7 and used hdmi cables from bluejeans cables for the shorter runs esp. in my HT (to projector).
    Posted to BeoWorld North America (Forum) by Simbohm on Fri, Jul 12 2013
  • Re: BeoSound 5 - search function for Spotify released

    Another user interface improvement.... If you have link rooms, the volume control does did not work on the BS5 (the logic was - which rooms volume does the bs5 change). I have a BV10 in the same room as my BS5 and this was annoying, since I had to find a remote to change the volume (Esp for the wife when I slip the remote in my pocket and walk around the house-opps). Now, you can control the volume in the room from the bs5 volume control... Thankfully - just a great usability function.
    Posted to General Discussion & Questions (Forum) by Simbohm on Fri, Jul 5 2013
  • Re: BV11 software update?

    Have both downloaded and working. Removed a host of problems when listening to my BS5 and BV11 and link rooms. Things just seem to work much better, before I had a lot of random problems. Time lag when playing audio seems to have disappeared (or at least reduced dramatically to the point I cannot notice - rooms are far apart) - which is fantastic
    Posted to General Discussion & Questions (Forum) by Simbohm on Wed, May 15 2013
  • Re: Sub to pair with BL 8000.2

    I have used an 8" Velodyne sub for 5yrs now with my 8000 (not 8002). I felt the lab 2 was quite powerful, but not as musical or tight as the Velodyne. The small Velodyne just rounded out the 8000's perfectly. I use a Velodyne SPL-800R which is no longer made, but has been updated since. I listen to music and tv on it, but mostly music. The sub comes with a microphone and has been configured using the room correction feature - sub is set to a level of 42(out of 99 I think). I have a lab 11
    Posted to General Discussion & Questions (Forum) by Simbohm on Fri, Mar 22 2013
  • Re: New House

    Here's what I'm doing- may answer a few questions regarding cat 7 - HDMI run over cat 7 where distances are over 40' or so and/or its near a set of B&O speakers or system (where I need Cat7 - see below) - PowerLink run over Cat7 for all speakers - MasterLink run over Cat7 (most converters in my av rack - except for BeoLab 3500) - NetworkLink run over Cat7 - IR - 4 IR links for PUCs over one Cat7 could use Cat6 - (but I had Cat7 on premises) - GigE over Cat7 - Beosystem3 - remote eye
    Posted to BeoWorld North America (Forum) by Simbohm on Sat, Mar 2 2013
  • Re: New House

    That's what I have done. I should have all my cat 7 installed to all rooms and future locations done by the end of this week. Wireless was randomly unreliable... And was was just making me unhappy. So I just bit the bullet and bought a huge spool of cat 7,and had it run from my AV closet to all locations. Some of the ones I'm not using right now - those cables are buried behind Sheetrock and I have photographs showing where they are so they can fished out at a future date.
    Posted to BeoWorld North America (Forum) by Simbohm on Thu, Feb 28 2013
  • Re: New House

    I went through this decision process a month back... I went into it thinking I could get away with wireless. Unfortunately my house is finished - except the basement (which is being finished right now). I am simultaneously in the midst of an install and B&O installers have run mostly cat 7 everywhere with cat 5 for IR. All the cables run to a rack I have in a conditioned closet under my stairs. We are connecting 8 rooms (including a HT) with 4 TV's, three systems - all B&O. They intend
    Posted to BeoWorld North America (Forum) by Simbohm on Wed, Feb 20 2013
  • Re: TiVo codes and beo6

    I am supposed to have this setup next month. I'll try and dig this post up if I remember. A
    Posted to The Beo5/06 Remote Forum (Forum) by Simbohm on Wed, Feb 20 2013
  • Re: My first ML/NL product

    I am using both Beomaster and Beosound 5. Dealer (summit NJ) has two sources running to one set of speakers and plans to do the same at my place. I will forget exactly how they will set this up. We had to do this so I could have music playing concurrently across my Beolabs and not incurious NL delay when using the Beovision 11. They are installing in early Feb. I will be there and let you guys know what components they used for the connectivity.
    Posted to General Discussion & Questions (Forum) by Simbohm on Mon, Jan 28 2013
Page 1 of 2 (14 items) 1 2 Next > | More Search Options
Beoworld Security Certificate

SSL