Sign in   |  Join   |  Help

Search

  • Beotime problem with display and navigation pad

    Hi - I recently bought a Beotime, advertised as faulty, so I kind of knew what I was getting myself into. While visually beautiful, it has two problems: 1) Display 3 is completely dead, no lights, no numbers, no nothing. 2) The directional pad does not work 'to the right' which means it is impossible to access the menus, set the time etc. I wonder if it is possible to repair it at all. Any ideas? /Filip
    Posted to The Workbench (Forum) by Filip on Mon, Mar 22 2021
    Filed under: Repair, Beotime, display
  • Re: Beogram 2000 5244 too slow...

    While this may work for a short while, you will eventually experience that the motor bearings will run dry again. They need to be infused with oil under vacuum and then you can enjoy a silent motor for hopefully another 30 years.
    Posted to BeoGram (Forum) by Filip on Wed, Feb 3 2021
  • Re: Beogram 2000 5244 too slow...

    While this may work for a short while, you will eventually experience that the motor bearings will run dry again. They need to be infused with oil under vacuum and then you can enjoy a silent motor for hopefully another 30 years.
    Posted to BeoGram (Forum) by Filip on Wed, Feb 3 2021
  • Re: Beogram 7000 muting question

    Thanks for the answer - then that is one less thing to worry about :)
    Posted to BeoGram (Forum) by Filip on Mon, Nov 2 2020
  • Beogram 7000 muting question

    Hey - I finally got my MMC2 for my Beogram 7000 retipped and the sound is again as it should be. However, I notice that when the tone arm is lifted in the middle of the song, it mutes the left channel a little before the right channel - this should happen at the same time, right? Also when the tone arm is set down in the middle of a song, there is also a muting delay for half a second on the left channel. Is this adjustable somewhere?
    Posted to BeoGram (Forum) by Filip on Fri, Oct 30 2020
    Filed under: Beogram 7000 turntable muting
  • Re: Beogram 4002 (5521) restoration woes

    Good job.
    Posted to BeoGram (Forum) by Filip on Fri, Oct 16 2020
  • Re: Beocenter 7007 record player problem

    Also, it sounds like you have not balanced the arm properly. Turn the counterbalance until the arm floats, tip it lightly and it shoud go back to floating, then turn the small dial to zero. After this you can set the tracking weight which I believe should be around 1.5 grams.
    Posted to The Workbench (Forum) by Filip on Sun, Oct 11 2020
  • Re: Beocenter 7007 record player problem

    You probably need to adjust the set down point for 12" records. You can see how to do it in the service manual.
    Posted to The Workbench (Forum) by Filip on Sun, Oct 11 2020
  • Re: Connecting an A/V 7000 to Penta 1 speakers and Penta display

    You probably already know the answers by now but just in case: For the display issue: use a full mounted powerlink cable for the one you want the display to show, and just a half mounted powerlink cable for the other one.
    Posted to General Discussion & Questions (Forum) by Filip on Fri, Sep 25 2020
  • Re: Beolink 7000 back light and recapping.

    The only issue now is that the BL has a buzzing sound. Seems to come from near the battery compartment.
    Posted to The Workbench (Forum) by Filip on Fri, Sep 18 2020
Page 1 of 6 (59 items) 1 2 3 4 5 Next > ... Last ยป | More Search Options
Beoworld Security Certificate

SSL