Sign in   |  Join   |  Help

Search

  • Re: Using a raspberry Pi as a DIY equivalent to Logitech Harmony

    Thanks for the very quick response! I've sent an email back to you.
    Posted to The BeoRemote One & BT (Forum) by Hyponx on Thu, Apr 16 2020
  • Re: Using a raspberry Pi as a DIY equivalent to Logitech Harmony

    Hello gents, Stumbled upon this post a few days ago and it's been a big help. I've got a Pi4 here now and am looking to get a nano + IR Eye in the near future. Overall my system is very similar to yours. Could you please also send the files to me? I've noticed that the github link is not working anymore either. Thanks!
    Posted to The BeoRemote One & BT (Forum) by Hyponx on Thu, Apr 16 2020
  • Re: Beolab Volume control without amp

    Very interesting to hear Bill, thanks for the first hand advice! I know that some of Schiit's other products have seen mixed reviews. Audio Science has taken to doing some relatively scientific reviews and as it so happens they did review the Sys (quite favorably) https://www.audiosciencereview.com/forum/index.php?threads/review-and-measurements-of-schiit-sys-passive-pre-amp-switcher.2335/ . Frequency response error looked good across range of volume settings. But I did notice that Schiit warns
    Posted to General Discussion & Questions (Forum) by Hyponx on Mon, Mar 30 2020
  • Re: Beolab Volume control without amp

    Perhaps a simple volume potentiometer could be used to adjust the overall volume output from the echo down a bit. Like this one, its passive so no additional power input would be required. https://www.schiit.com/products/sys . I'm sure some googling may yield some other similar products. Good luck!
    Posted to General Discussion & Questions (Forum) by Hyponx on Mon, Mar 30 2020
  • Re: Daisy chain BL2

    Thanks Geoff, I hadn't thought of that but it makes complete sense! I'm going to defer commenting on the cable to some of the other folks here with more expertise (Steve must be around here somewhere) The desired affect of the subwoofer when connected to the BS9000 will only be achieved if the connections are in this order: BS9000 --> BL2 --> BL1's. So no the second variation you proposed also wouldn't work As an aside what you are describing (Using one plug on the BS9000 for
    Posted to General Discussion & Questions (Forum) by Hyponx on Sun, Mar 15 2020
  • Re: Daisy chain BL2

    Hi futurist, Mechanically it is possible, however I would not recommend it. The Beolab 2 is advised to be the first device in the chain because it applies a crossover which keeps the low frequency information for itself and sends only the sound information above that cutoff to the speakers via its outputs. This works well because the subwoofer is designed to reproduce more of the lower frequencies because of its big cabinet and drivers. In practice many users including myself will likely comment
    Posted to General Discussion & Questions (Forum) by Hyponx on Sat, Mar 14 2020
  • Re: Beosystem 3 combining with hdmi arc

    There are a few things to keep track of here: The Beosystem 3 does not support ARC, the newer E-ARC or the newer lossless HD audio formats like Dolby TrueHD and DTS-MA Per https://www.rtings.com/tv/tests/inputs/5-1-surround-audio-passthrough No TV tested can pass PCM 5.1 through HDMI-ARC. The newer HDMI-EARC can but is very new and there are not many devices supporting it yet. The ATV4 by default outputs LPCM not bitstream and can't do HD bitstream natively, I also don't believe it can decode
    Posted to General Discussion & Questions (Forum) by Hyponx on Wed, Mar 11 2020
  • Re: How to connect properly Beolab 2 with Beolab 3 and sonos connect

    Hi MadHouseINC, I've setup a similar system for my father and have a few suggestions: On the Beolab 2: There are two switches on the back: The Setup switch affects the relative volume between the subwoofer and the speakers, for your specific setup I believe the correct position is #2 . A different position may make the speakers too loud/quiet compared to the subwoofer - (Ref English Beolab 2 User Manual Page 8, Beolab 3 sensitivity is the same as the speakers in the #2 category) The Position
    Posted to General Discussion & Questions (Forum) by Hyponx on Tue, Aug 27 2019
Page 1 of 1 (8 items) | More Search Options
Beoworld Security Certificate

SSL