[Wojciech Herchel]

Thanks – I suspect I need to lift up and take out the whole top plate, not just the platter to access this switch?

[Wojciech Herchel]

Thank you!

[Wojciech Herchel]

Got it, managed to take it out. The manual says the adjustment should be made with a counterbalance weight inserted though…? So I adjust, put it back in and measure and readjust if need be? stating the obvious, I can’t access the screw if the counterbalance is in…

 

Attachments:

You must be logged in to view attached files.

[Wojciech Herchel]

How exactly do I lift the silver counterweight? Does it slide off or something? Maybe a daft question, however I am a new to this, so wouldn’t want to break something by mistake…

[Wojciech Herchel]

Hi – where is the screw though? on the outside part of the counterweight, where the slider is or on the inside – see the picture – there is a screw on the inside part of the counterweight, where I marked in white – as it is dark and was not visible on the picture.

[Wojciech Herchel]

Thank you.

Second question I have that the stylus has a tendency to drag over the record a bit – particularly on the new/modern record – when it returns to home after finishing the record or pressing Stop – is it an easy adjustment? The stylus force is set at 1.5gr, it is a MMC20E. anything else that needs adjusting?

[Author]

Posts