I installed a 33µf radial cap of some kind. If it works should it continue to work? Is it likely to become an issue? I have seen that the 138AML is recommended. 33UF is the closest I am coming up with.
I will need to look and see what I put in there. I had to move the unit off the work station while I wait for the power supply caps to come in. It will be a few days.
It had the C2103 capacitor on the servo board issue. Once I had that fixed I started checking other boards. I know from past B&O repairs that these Philips caps have issues. These all tested bad and the main power supply caps were all leaking.
Welcome to Beoworld! I am guessing a bit here, but it looks very similar to the BC9500 decoder board. Have a look a the BC9500 service manual, which includes CD decoder circuit diagram and component list. EDIT: BC9500 CD decoder was board discussed here – maybe swap notes! https://forum.beoworld.org/forums/topic/beocenter-9500-cd-decoder-board-repair/
I will take a look this evening. Thanks for the info.
