[TomIM]

Thanks sonavor and Dillen for the information. I have to put this on the back burner for now as I’m getting behind in other work. I’ll check out the things you suggested and follow up with reports of success or other questions. Tom

[TomIM]

Thanks for the information sonavor. Is the board with the 3 components a photo interruptor

and if I want to check it can I use a voltmeter or scope and see DC voltages or pulses? Is this turntable designed for the arm motor to stop if no pulses are going back to the micro, because the arm doesn’t go far enough for the mechanical switch to disengage before it stops.

Thanks, Tom

[Author]

Posts