Hi there, it took me quite a while a while to figure this out.
Masterpincode (MPC) from your store or B&O directly. Just enter the 5 digits where the 4 digits are requested and confirm by pressing the joystick button.
also, needs to be a remote with the stick.
most important thing that took a while with B&O third level support:
Please input the 5 digits when the PIN code menu is shown and then end by pressing the middle button. When using the remote shown in the video (which is the cursor model), please be sure the remote is in “Mode 1”. To set the remote in Mode 1 do the following:
• While holding down the • button (standby), press LIST shortly.
• Let go of both buttons – ADD? is now displayed
• Press LIST repeatedly until MODE? is shown in the Beo4 display and press the center button
• Press LIST repeatedly until MODE 1 is shown in the Beo4 display and then press the center button
• Now try again with the master code
