[radzio222]

This one from Ali, old one didn’t start any CD.

[radzio222]

A little update on a case. I replaced capacitors to new THT, low ESR, 105C.
I cleaned and lubricated again laser runner.

The result is that I have some more CD’s that Beo is able to read. Huge improvement in reading later tracks of CDs.

Also more CDRs are working now, but… There are still some CD that are unreadable very quickly.

IMHO it’ s a feature not a bug 😉

Anyway. Thanks for all your help. I finally can write that my Beocenter 9300 is operating again !

[radzio222]

But it doesn’t start event if I’m on CD mode.

[radzio222]

I found one another crazy behavior of the CD. when I stop playing, laser do not go back to a start position ?

 

Something is not right.

I found also that when i put CD and close a door it is not starting reading the disc, I need to push CD button ?

 

@guy I found some service manual for beo9000, but its lacks service mode for CD. Have only for FM and Deck.

[radzio222]

Guy, thanks for hour help. This picture helped me a lot! Door are now fixed. Thank you very much!

[radzio222]

Hi,
No I couldn’t find any. If you could share with me, It would be great.

That was my suspicion that I made it opposite. So another a lot of work with my Beo 🙁

[Author]

Posts