[Michael Brown]

Thanks they do; just replaced the capacitors with your kit sound superb

[Michael Brown]

If anyone can mend these speakers its Craig!!

[Michael Brown]

Try spraying contact cleaner on TEST switch and then move it on and off a few times; sometimes works

[Michael Brown]

Could anyone with the requisite knowledge look at these re suitability

https://www.beyma.com/speakers/Fichas_Tecnicas/beyma-altavoces-hoja-tecnica-baja-media-frecuencia-8BR40N.pdf

Physically they fit and are advertised as replacements

 

 

[Michael Brown]

Thanks

I was going to trash it but will keep hold!

Someone can have it maybe for postage cost; PM me

[Michael Brown]

The coil is damaged and its seized with detached magnets

[Michael Brown]

Martin Ive read the importance of gluing the magnets; do you apply a bead of glue at the top of the magnet where it slips inside the holding basket??

[Michael Brown]

Thanks Martin

Yes 6.4 ohm. I am going to follow your valuable advice

Michael

[Michael Brown]

HI ARE THESE 6302 OR 6312 MODELS THERE WILL BE A STICKER ON BACK

[Michael Brown]

Good news: the hum after a bit of use is now barely audible helped also by isolation feet. The amp has stood around unused for years maybe it needed some heat!

[Michael Brown]

Thank you Martin; is replacing with used old stock the way to go or is there a modern replacement?

[Author]

Posts