lostagain

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: Penta 3s foam or rubber? midrange #59162
    lostagain
    BRONZE Member

      Hi Group,

      Got round to refoaming these with foam from AF in the Netherlands, all were a perfect fit but used my own modelling brush for the glue as the one supplied was a bit on the large size, also took Steve from Sounds Heavenly advice and turned one panel so the tweeters were on the inside and must say with the both jobs done the sound is a vast improvement, crossovers next i think.

      Thank You all for your advice.

      in reply to: Penta 3s foam or rubber? midrange #51127
      lostagain
      BRONZE Member

        Thank You gents, foam it is then, any particular supplier although i did see one on the bay (not the Chinese one) or the Dutch one AF, will replace the sealing rings as well then perhaps the caps in the crossovers.

        in reply to: BM 5500 and Penta’s #43985
        lostagain
        BRONZE Member

          Just looked and the speakers are Beolab’s 6632 which are 3’s from what i can make out and fwiw the displays are green and working apart from a couple of pixels in one.

        Viewing 3 posts - 1 through 3 (of 3 total)