Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Kjj1802

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: Multiroom advice #49526
    Kjj1802
    BRONZE Member

    Again, thank you kindly for all the advice given. I have now purchased:

    • A beolink masterlink converter (https://www.beoworld.org/prod_details.asp?pid=983);
    • A Beo4 remote control; and
    • OpenII 7 Pin DIN Male to Dual RCA Male Cable Audio Adapter Lead to connect AUX Port to Bang Olufsen – without me knowing if this is definitely what I need.

    I have connected everything up (powering the converter last), set the remote control to Option 6, and tried the A.Aux button. On the wall controls / IR eyes there are only ever red lights – this never goes out, which presumably means it is only ever in standby(?). I cannot hear anything through the passive speakers and nothing seems to happen when using the remote (there is a signal being sent from this). I know the music source system is playing through line out (generally) but when connected to the converter I cannot get any sound through the passive system. I have run out of ideas of how to resolve the problem myself – can anyone offer any further help, please?

    Many thanks in advance!

    in reply to: Multiroom advice #49524
    Kjj1802
    BRONZE Member

    Thank you all, That is extremely helpful. To clarify one more point for me please… do I *need* a remote, e.g. to select a source or mode (even though it will just be an auxiliary connection to the converter), or will the sound play through the speakers fine, such that I can just control the volume via the room wall controls?

    in reply to: Multiroom advice #49520
    Kjj1802
    BRONZE Member

    When you describe the a.tape a.aux commands etc. Is this a remote control? I don’t have that remote if it is. Presumably same remote works in each room? What remote would I need? Many thanks

    in reply to: Multiroom advice #49518
    Kjj1802
    BRONZE Member

    Many thanks for the assistance. Forgive me, what is SW1.5?

Viewing 4 posts - 1 through 4 (of 4 total)