[Jg1976]

Yes, the delay is very noticeable. So the different speakers play with different delays.

I was somewhat surprised that it didn’t work. If I connect only two it works perfectly..

[Jg1976]

Hi,

Sorry but I cannot let it go and need to do another post..

If you put a Coaxial “dummy” for instance in Beosound 9000 mk3, then do not put any cds in the player..

Wouldnt this trick the Beosound thinking it playing CD but control volume over powerlink

Then connect the Wiim Pro as the image attached. Am I missing something?

[Jg1976]

Thank you again for a perfect answer & clearing things up!

[Jg1976]

Thank you Millemissen for clearing some things up!

Just for curiosity, how does the volume works in this normal setup together with beosound 9000 mk3 and Coaxial/digital? Press CD should play cd via coax/digital and how does the volume controls  (in the 9000 processing the coax to beolab 5 perhaps)? On the other hand press radio the signal goes via powerlink obviously..

[Jg1976]

Thank you Keith.

It is definately a 3500 mk1.. So the label says.

[Jg1976]

Thank you KolfMAKER..

Maybe I will give that a try once I have the time..

Appreciate all the help..

[Jg1976]

I find this article online:

“Beolab 3500 nightmare!!

Recently purchased a beolab 3500 with the intention to use it as a stand alone sepaker.It responds fine to the mute and timer buttons however doesn’t seem to respond to a controller I know is working.Have tried putting it into option 6 with no luck.somone please help!

Answer: It seems like this is a common issue my 3500 died this way too. Tried every reset command but the only way to fix this error is to change the entire IR board. But I didn‘t find any boards online and I think repair from B&O would be very expensive. I ended up buying a used 3500 for 100€ and be hold the old one for spare parts”

[Jg1976]

Yes, I have 9 of them or more so I tried several that also work in other rooms. So it looks to be an IR-issue on the Beosound 3500.. How to solve I do not know..

[Jg1976]

Ok, so I connected it to my normal Masterlink. It works. But only when press ON on the Beosound 3500 panel and not via BEO4 so it seems to be a remote control issue..

It won’t respond to any command so it definately look to be an L-opt 0-issue..

I can not either change L-option due to the remote does not respond..

Are there any way to reset the unit without the remote?

 

 

[Jg1976]

Thank you for all help!

The Beosound 3500 is still stone dead. Nothing happen.. It is now in L-opt 2 (thank you Guy) I have also tried all other L.opt.

KolfMAKER, nothing happens when I press MENU 0 4 GO. Nothing happens when I press MENU 0 2 GO..

Maybe it is broken?

[Jg1976]

Thank you coralpa!

I thing that cleared up the question!
Will keep my ouvertyr for a while…

[Jg1976]

Thank you Millemissen. That makes ouvertyre quite rare does it not?

[Author]

Posts