[Arthur Vink]

Alright thanks!!

final question;

ive put a 1611 converter between the BC9500 and beovision, with the beolabs connected to the BV7.

I’m trying to use a beolink7000 to control the audio sources and volume. However, if I press CD on the 7000, the beocenter wakes up but the beovision doesnt. The beovision does wake up with a beo4 if I press CD.

When playing a CD, if I select a track on the beolink7000, it does go from track 1 to track 4. The display on the beovision changes to CD4. But then I cannot controle volume with beolink7000, but it can control volume with the beo4. If I turn off the beocenter with the beolink7000, the beovision also turns off (??)

Beovision and beocenter are both in A.opt2 and V.opt2, would that be the problem?

Thanks in advance

Location: Netherlands

Signature: Beocenter 9500, Beogram 9500 mmc4, beolab 9, beolink 7000, beovision 7-40mk5

My B&O Icons:

[Arthur Vink]

Thanks for the comments guys! You have a suggestion for the settings of the speakers? Suurround L+R or Front L+R?

Location: Netherlands

Signature: Beocenter 9500, Beogram 9500 mmc4, beolab 9, beolink 7000, beovision 7-40mk5

My B&O Icons:

[Arthur Vink]

Thanks guys! Needs a clean and proper installation with cables etc but it’s a start 😁

Attachments:

You must be logged in to view attached files.

Location: Netherlands

Signature: Beocenter 9500, Beogram 9500 mmc4, beolab 9, beolink 7000, beovision 7-40mk5

My B&O Icons:

[Arthur Vink]

Hi,

I have the same version, including motorized floorstand in the basement, looking to do something similar. Does this also remove the compatibility with beo4 and the motorized floorstand?

Location: Netherlands

Signature: Beocenter 9500, Beogram 9500 mmc4, beolab 9, beolink 7000, beovision 7-40mk5

My B&O Icons:

[Author]

Posts