Problem solved! Found som broken traces toward D200 and D201 on the board itself. Made a repair, and now the sound is perfect from both speakers? Thanks a lot for all the help, fantastic!
Problem solved! Found som broken traces toward D200 and D201 on the board itself. Made a repair, and now the sound is perfect from both speakers?
Thanks a lot for all the help, fantastic!
I work as an automotive technian, so I have acces to an scoope.
I will begin to troubleshoot over the weekend, and get back when I have some more progress.
Thanks for the helpful input so far?
Yes it has always been an issue, from the very start. It was the reason I changed the capacitors.
And because it have developed the classic humming, so I did an overhaul with a capacitor-set and new bulbs of the correct type?
Thanks for the helpful input.
The FM presets work normal, sound coming from both speakers without any distortion.
I will try checking the signal at D200 and D201 as suggested and the preamp circuits.
Thank you in advance
As a sidenote I should mention that the problem is the same even if I use the output for speaker-set 2.
