Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BowieRoxy

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • in reply to: How to wire 7 din plug to Beogram #53435
    BowieRoxy
    BRONZE Member

    Wow, who knew this soldering thing would be so difficult! Ive melted the plug!

    think I need a finer, smaller soldering iron and finer solder…

    in reply to: How to wire 7 din plug to Beogram #53433
    BowieRoxy
    BRONZE Member

    Excellent ?

    in reply to: How to wire 7 din plug to Beogram #53431
    BowieRoxy
    BRONZE Member

    Thank you my friend, champagne and chocolates on the way if I get this working ?

    in reply to: How to wire 7 din plug to Beogram #53430
    BowieRoxy
    BRONZE Member

    If I get it working I was going to buy a beomaster 2000 to go with it

    in reply to: How to wire 7 din plug to Beogram #53428
    BowieRoxy
    BRONZE Member

    Last question, honest… do all of these wires have to be soldered into the plug?

    in reply to: How to wire 7 din plug to Beogram #53426
    BowieRoxy
    BRONZE Member

    Thank you again.

    just for an idiot guide and to be totally clear, you mean shield are the bare wires that surround the coloured wires inside the cable when I cut it back?

    there is no other bare wire or wires so I guess that’s what you mean?

    in reply to: How to wire 7 din plug to Beogram #53424
    BowieRoxy
    BRONZE Member

    Also, what is ’shield’?

    can you tell I know absolutely nothing about these things ?

    in reply to: How to wire 7 din plug to Beogram #53423
    BowieRoxy
    BRONZE Member

    Wow, that’s fantastic  thank you very much for that!

    the only thing I’m not sure about now then is how do I know which pin is 1-7? How do I know the number sequence of the pins?

    you’re a lifesaver, thank you my friend ??

    in reply to: How to wire 7 din plug to Beogram #53421
    BowieRoxy
    BRONZE Member

    That should say – didn’t know he’d cut the din plug off… my phone is playing up…

    in reply to: How to wire 7 din plug to Beogram #53420
    BowieRoxy
    BRONZE Member

    Thanks for that Keith. I appreciate it.

    the yellow wire in that image of the 7 pin plug is going to #1 pin. I thought it should be #7 pin…

    The photos are helpful but I can’t see which pins the coloured wires are connecting to. Also the silver wire I can only assume is the ground wire, which I thought was the main black one (there are 2 black wires, one thinner than all the rest.

    im so confused, starting to wish I’d never bought this, but I did t k owned but the din plug off…

     

    thank you though

    in reply to: How to wire 7 din plug to Beogram #53416
    BowieRoxy
    BRONZE Member

    Couldn’t find this in there.
    I can’t find a colour wiring diagram for pin on a 7 din plug for Beogram 2000.

    ill keep looking. If anyone has ever replaced the 7 din plug I’d be so very grateful if you could let me know the colour wire sequence.  Thank you

    in reply to: How to wire 7 din plug to Beogram #53415
    BowieRoxy
    BRONZE Member

    Thank you for that, I’ll have a look. My brain doesn’t work in this way with these things ?‍? but I’ll see if i can work this out.

    cheers

    in reply to: How to wire 7 din plug to Beogram #53413
    BowieRoxy
    BRONZE Member

    Can anyone help me with this? I have no idea which colour wire goes to which pin on a new 7 din plug.

    all I think I k ow is that the yellow wire is for data link…

     

    thanks again

    in reply to: How to wire 7 din plug to Beogram #53412
    BowieRoxy
    BRONZE Member

    Apologies, I meant 1980s beigram 2000

    IMG_1110

    in reply to: How to wire 7 din plug to Beogram #53418
    BowieRoxy
    BRONZE Member

    ?

Viewing 15 posts - 1 through 15 (of 15 total)