Hello all,
Because of the interest in the Service Tool for BS5 / BM5, I have made the 2.5 GB zip file available for all. Use this link for download:
https://1drv.ms/u/s!AvyICKrRk1dflLEkQs3K36JxF2p_EQ
Be patient with the download. It is highly compressed and will take some time to unzip.
I have attached a short introduction to the content, the B&O Service Manual and updated guides on how to install a new SSD:
(1) B&O instructions for the Service Tool in the Service Manual for BS5 / BM5. The manual has instructions on how to update the BIOS and replace motherboard, harddisk, B&O master board, etc.
(2) My guides on how to use the service tool with Hirens Boot CD to use the original B&O clone (Norton Ghost) on a new SSD with correct alignment for SSD drives, including optimizations for SSD drives.
If you have any questions, please ask in this thread.
Best regards,
Jens
I followed the steps you suggested and I was able to turn on the computer, but I have a question:
1. After installing the program, every time I turn on the computer to enter the system, it freezes on a black screen before entering the program.
2. Sometimes I can’t boot.
3. Sometimes I can boot into the program, but after a while the screen goes black and I can’t do anything anymore, so I have to turn off the computer.
From the above message, what do you think could be the cause? What I’m wondering is whether the power system is like that or not.
Regards,
Sammy
Attachments:
You must be
logged in to view attached files.
