BeoWorld Logo
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

bigbruggsy

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2 November 2025 at 14:24 in reply to: Beosounds – when to replace onboard backup battery? #70855
    bigbruggsy
    BRONZE Member

    Hello fellow B&O lovers, Just a quick question about CR battery replacement. Is there a setup procedure that is needed after you replace the battery? I replaced one in an older Beosound Ouverture the other day and now it has issues receiving some commands from a Beo4 remote. I hope you can help. Thanks again.

    23 September 2025 at 18:56 in reply to: Beosound 9000 IR repair, PCB 14. #69868
    bigbruggsy
    BRONZE Member

    Thank you for your post and update. I also have a problem with my Beosound 9000 not being able to respond to the remote (checked that its in the right “option”) My question is how do i remove this PCB?

    27 February 2024 at 09:53 in reply to: Beocenter 2 buying considerations #52549
    bigbruggsy
    BRONZE Member

    Hi Madskp, Thank you for your detailed information in your posts. I have a question as to where you bought the 25mm x 1.5mm belt? I’ve tried ebay and amazon and don’t see any that size.

    3 September 2022 at 21:59 in reply to: BV 11-40 mk4 turned black #38649
    bigbruggsy
    BRONZE Member

    Hi, I have the same problem with my Beoplay V1-40 which is basically the same TV just in a different skin. Did you find out what the problem was with your TV?

    3 September 2022 at 21:47 in reply to: Beoplay V1-40 service manual? #38756
    bigbruggsy
    BRONZE Member

    Hi all, just for future reference for anyone else. I’ve opened the Beoplay V1-40 and inside its basically a Bv11. I’ll use the BV11 service manual to help me trouble shoot my issue. Regards

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)