Thanks for your contributions !
Specifically:
- @Guy. There are 4 link rooms in the ML system; in one room there is a Beovision MX 7000 which is A/V connected : this implies that the modulator on the BV7 is activated (and set to “AUTO”).
- @Carolpa. The BV7 audio settings are very simple and go like following:
- AST = OFF
- In the speaker type menu: Centre = Beolab 7 ; Speakers = NONE (all positions) ; Speakers role/distance/level = all empty
- –>> As for my knowledge just the “basic” audio format is activated.
- @Stoobie. I’d undertstand your consideration if all the speaker would be connected to the TV. But in my case, the Beolab 7 is the only speaker connected to the Beovision 7. The Pentas are connected to the Beosystem 7000 like in a very old-fashioned 🙂 stereo audio system.
@ All.
Other than the fact that every “surrond” setting on the TV is not activated, however, for what I know about the BS3/BV7 audio processing, the TV sound configuration shouldn’t have any effect on the Master Link transmission (am I wrong??).
But actually, to my surprise, that’s exactly what seems to be happening: apparently, when the same video source is activated on both the TV and the HIFI, the TV “does something” to the audio signal just before it is routed to the Master Link cable which, as far as I Know, souldn’t be affected ….
