[andbe]

Good morning together,

my BeoMaster5 has not been in standby mode for quite some time. The BM5 is linked to BS5 and BL 8000. What strikes also the tracer is not functioned for switching off and turning on at the back any more. Is this a software or hardware issue that the board is defective. Also have already tested different options via the F8 key with connected keyboard at restart, but came to no result.
Does anyone have any advice on what it might be?

Thank you in advance greeting Andreas

[andbe]

Good morning Stoobie

now I had to compare, but no the Beo5 is a Beo5.

Greeting Andreas

[andbe]

Good morning Stoobie,

turning off the dealer mode was just the right thing, now the transmission power is also great.

The TV (DVD) works perfectly.

Did not find the LC2 equally LC2 and with N.Radio and N.Music the same is because there are several of the same e.g. N.Music. I then tried different ones offered in the software.

LC2 now works perfectly, N.Radio I switched to radio in the BS5 and of course on the Beo5 also on radio. What I haven’t found yet, why the radio stations in the display of the Beo5 don’t harmonize with the BS5. N.Music can also be turned on, but I can’t use the different stored CDs yet.

Greeting Andreas

[andbe]

Good morning,

I first had to deal with the BeoConnect and BeoPlayer. So I would like to say a big thank you back. You were right the Beo5 was really in dealer fashion. Thanks to your great description, I changed it.

Thank you nice weekend
Greeting Andreas

[andbe]

good morning
thanks to your description, I have already come a long way. The TV reacts very well, only the BS5 with Master does not run. The transmission power of the remote control is also poor, I have to be directly on the TV so that I can operate the TV. will change the Beosound settings again.

Thank you greeting Andreas

[andbe]

Thanks for making it so great. Since I am at home at the moment, I will immediately sit apart with it. I have another question, or maybe you know who can help me. The question would be why does the BS5 or BM5 not show me from every saved CD or just played the cover? If it is retrieved via online it should work because the radio also runs flawlessly and without interference!
Greeting Andreas

[andbe]

Good evening Stoobie,

ok with the “work offline” I was already on the right way. I’m still practicing with everything else.
BV7 with satellite tuner, DVD, and soundbar type 6210??? is not related to
Beosound5 and Beomaster5 with CD player and Beolab 8000.
The devices stand together in the same room
Beo4:
controls Light: LC2
controls SAT: Beovision 7 with DVD and soundbar
controls N.Radio & N.Music & CD Player: Beosound 5 and CD Player Beomaster 5 incl. Beolab8000

Thank you very much in advance Gruss Andreas

 

[andbe]

Hi Stoobie, thanks to the feedback.

The software I have already installed, this also functions partially. I can transfer some changes to the Beo5. However, there remain some questions when launching the software: The server cannot be found! Please select “work offline” and try again.??? Which server cannot be found??? When I work offline, I can set some new settings and transfer them to the Beo5. However, I miss the option N.Music, N.Radio and SAT. How can I tell the Beo5 to work with the Beosound and BeoVision?

Greeting Andreas

[Author]

Posts