Home Forums General Discussion & Questions Wanted: cassette heads

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #45631
    Pearsy
    BRONZE Member

      I have a 2002. My tape deck runs fine, I just put new belts on but there is little to no sound coming out. I have to turn it right up to hear it, I was thinking it’s the heads?
      any advice greatly appreciated

      #45632
      Die_Bogener
      BRONZE Member

        Heads defect?

        99%= NO

        Caps defect, quite normal.

        Electrolyth and tantalum caps fail after this long time, that’s quite normal.

        #45633
        Dillen
        GOLD Member

          Bad tantals around the Dolby IC. I’ve seen that a couple of times.

          Martin

          #45634
          RobertBowman
          BRONZE Member

            Spam removed

            #45635
            chartz
            GOLD Member
              • Location: Burgundy

              The head is probably intact. Only Bogen heads on open reel Beocords and Uhers pose problems.

              Do check capacitors around the Dolby circuit.

            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.