USING BEOGRAM TX2 WITH BEOMASTER 1900 - BeoWorld Forum

This topic has 1 reply, 2 voices, and was last updated 4 hours, 6 minutes ago by Mark-sf.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
31 October 2025 at 11:25 #70820

Jasper Kroep
BRONZE Member

The Beomaster have 5-pin DIN input, but the TX2 have RCA plugs. What do I need to make the TX2 compatible?

31 October 2025 at 16:05 #70827

Mark-sf
BRONZE Member

You are going to need a male din to female rca phono adapter and then connect the TX ground wire to a screw on the 1900.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.