Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoMaster Tuning a BEOMASTER 7000 with a BEOLINK1000

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #33567
    TheHuf
    BRONZE Member

    Hi there ,

    I’m new to the B&O scene. I have acquired a BEOMASTER 7000 with BEOLINK1000 controller +with Menu tab. Can I tune the radio with it. I’m presuming this is not possible & I need a BEOLINK 7000. Are there any key combinations I can use to tune each station.  Any help / tips grateful accepted.

    Best wishes, Keith

    #33568
    trackbeo
    BRONZE Member

    Use single number keys 0-9 to go to radio station presets. Use the GOTO  button to type in tuning with number keys.  GOTO then TURN switches AM/FM.  There’s search mode, too, with << and >> buttons.  You may find the Beocenter 9500 manual helpful because it describes using the older Beolink rather than the special Beolink 7000, which is what the Beosystem 7000 manuals describe.

    #33569
    TheHuf
    BRONZE Member

    Thanks for the suggestions, I’ll look at this when I’m back. Thank alot.

    #33570
    TheHuf
    BRONZE Member

    Hi, I got the hang of the tuning quickly

    Once I worked out which stations had good reception.

    Thanks.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.