Not sure what to try next with my 4002. Help please!

[Marcellee]

I have replaced the servo motor belt and the turntable belt and adjusted the tonearm weight to the recommended amount. I was able to get the turntable to start playing but after about 10 seconds the record begins to skip because it doesn’t seem as if the tonearm is progressing. I have also tried adding weight but am cautious given the expense of breaking the stylus.

Here is a video of what I am seeing: https://youtu.be/M45AeAkHWUA

I am not sure what to do next, nor sure what the actual problem is at this point.

Any help pointing me in the right direction would be greatly appreciated.

[hcraig244]

Sounds like a problem with the servo…..the shutter adjustment could need adjusting. Silver members can access the service manuals which describe how this can be carried out, I haven’t done much work on the 4002 many in here have….im sure someone will advise you further, my advice is to go silver and download the service manuals

Craig

[Evereddie]

You might check and search for an answer at

https://beolover.blogspot.com

Location: SF Bay Area

[Author]

Posts