Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoLab Need help on beolab1 (red, short green, red, no sound)

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #52831
    69er
    BRONZE Member

    Hi folks,

    I acquired two broken Beolab 1.

    one was easy to fix (tweeter).

    the other one is more complicated.

    speakers are (now) ok. The ptb ntc also.

    I cross installed components between the two and now I know, the faulty component is on the (bigger) amplifier board.

    Nothing visually defective.

    a lot of parts on this board, so could anyone please give me a hint, what to measure and exchange?

    behavior: goes on red, then for a second on green, then stays red. No sound.

    When changing this board it works, so the malfunction needs to be here.

    thanx in advance

    69er

    #52832
    69er
    BRONZE Member

    Any expert for Beolab 1 available?
    best regards

    69er

    #52833
    69er
    BRONZE Member

    Nobody, who knows how to fix that thing?

    #52834
    nbohemen
    BRONZE Member

    I had the same problem. I had it fixed by a specialist in Utrecht, the Netherlands.

    #52835
    Valve1
    GOLD Member

    What country are you in ? There might be a local specialist repair available.

    My B&O Icons: No description available No description available No description availableNo description availableNo description availableNo description availableNo description available No description available
    #52836
    69er
    BRONZE Member

    I am in Germany. @nbohemen: Could You please share the contact in Utrecht with me?
    Best regards

    69er

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.