Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoCenter Modern speakers for Beocenter 2200?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #44152
    hmm
    BRONZE Member

    Hope someone can suggest something…

    I’m about to dig out my old Beocenter 2200 (not used for the past 20+ years).

    I’d like to connect some speakers that are perhaps slimmer or more stylish than the originals (Beovox 25?).

    I don’t know the technical requirements but they don’t need to be more powerful than the originals.

    Any suggestions anyone? Many thanks.

    #44153
    Mark-sf
    BRONZE Member

    By slim do you mean less wide or less deep? If you want to preserve it as a B&O system, a pair of CX100’s are narrower and are quite stylish IMHO.  Remember, this unit has a built-in loudness contour in the volume control (which you can’t bypass without getting inside) so should not be paired with speakers that are bass heavy.

    #44154
    hmm
    BRONZE Member

    Many thanks Mark.

    Just wondering – CX100s are 6 ohm, 2200 is 8 ohm; does this have any effect in practical terms?

     

    #44155
    Mark-sf
    BRONZE Member

    No, as the amp is rated at 25W into 4 ohms.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.